ICC CAT6 Ethernet Patch Cord with Clear Boot Strain Relief, RJ45, Stranded, 550 MHz, UTP, Pure Bare Copper Wire, 24 AWG, LAN Network Patch Cable, Blue, 10 FT, Single

.ICC’s CAT6 unshielded twisted pair (UTP) patch cords exceed all performance requirements up to 550 MHz. They are ETL verified to ANSI/TIA-568-C.2 and UL listed. These patch cords are made from low-profile, snag-free boots for high-density applications. They are available in the most popular stock length and in a variety of colors to easily differentiate connection types.
.NATIONAL ELECTRICAL CODE (NEC) COMPLIANT: Built with 100% stranded pure bare copper conductors, meeting NEC Section 800.179, which mandates that “Conductors in communications cables, other than coaxial, shall be copper.” Rated for 75°C and 300V, CAT6 patch cables support stable network communications while reducing fire hazards
.PoE++ TYPE 4 RATED PATCH CABLE: This CAT6 Ethernet patch cable is built with stranded 24 AWG pure copper conductors and supports Power over Ethernet (PoE++) Type 4 up to 100W, suitable for IP cameras, wireless access points, and other high-power network devices. Supports up to 250 MHz performance and is ETL and UL listed for safety and compliance
.DATA CENTER GRADE PERFORMANCE: CAT6 patch cables are wired to T568B and factory tested to meet TIA performance standards, supporting 10/100/1000 Mbps Gigabit Ethernet with bandwidth up to 250 MHz for structured cabling environments
.50 MICRO-INCH GOLD-PLATED CONTACTS: Contacts are plated with 50 micro-inches of gold over phosphor bronze to resist corrosion and support repeated plug-to-jack insertion cycles
.CLEAR BOOT WITH CLIP PROTECTION: Transparent boot provides a uniform look with the modular plug, prevents snagging on adjacent cables, and limits over-bending at the connector
.INDOOR USE: Designed for indoor network installations using PVC jacket material. Not intended for outdoor or direct burial applications