Summit Appliance AFZ1PVDL2BLHD 1.4 Cu.Ft. Countertop Purpose-Built Storage Freezer w/NIST Calibrated Temperature Logger (DDL), Left Hand, 22.25"H x 18.5"W x 23.25"D

Key Features

- Purpose-built all-freezer for storage medical, pharmaceutical, and life science applications
- Intuitive controls let you adjust the interior temperature between -30°C to -10ºC
- Electronic controller is equipped with a volt-free contact for alarm forwarding to an external remote system
- Includes a pre-installed 1/2" probe hole in the right interior wall to allow easier connection to user-provided monitoring equipment
- Control panel requires password entry to adjust the parameters beyond the set point
- Digital controls with a large LED readout in Celsius or Fahrenheit for intuitive temperature management
- Adjustable plastic-coated wire shelves for improved circulation
- Energy efficient LED lighting with internal on/off switch
- Keyed lock conveniently located towards the top of the door for added security (2 keys included)

Specifications

Overview
- Height of Cabinet: 22.25"
- Width: 18.5"
- Width with Door Open: 18.88"
- Depth: 23.25"
- Depth with Handle: 24.75"
- Depth with door at 90°: 42.5"
- Capacity: 1.4 cu.ft.
- Defrost Type: Manual
- Door: White
- Cabinet: White
- US Electrical Safety: ETL
- Canadian Electrical Safety: ETL-C
- Amps: 1.3
- Voltage/Frequency: 115V AC/60Hz
- Weight: 73 lbs

Freezer
- Door Swing: RHD
- Reversible: Factory
- Interior: 16.5"H x 15.25"W x 15.75"D
- Shelf Type: Wire
- Shelf Qty: 2
- Adjustable Shelves: Yes
- Thermostat Type: Digital
- Interior Light: Yes
- Refrigerant Type: R290
- Refrigerant Amount: 0.85 oz
- High Side PSI: 280
- Low Side PSI: 130
- Compressor Step: 8.25"H x 15.25"W x 4.25"D
- Temperature Range: -30 to -10ºC
• Purpose-built all-freezer for storage medical, pharmaceutical, and life science applications
• Intuitive controls let you adjust the interior temperature between -30°C to -10ºC
• Visual and audible alarms alert if the interior temperature rises or falls out of set range
• Electronic controller is equipped with a volt-free contact for alarm forwarding to an external remote system
• Includes a pre-installed 1/2 probe hole in the right interior wall to allow easier connection to user-provided monitoring equipment