ICC CAT6 Slim Ethernet Patch Cord with Clear Boot Strain Relief, RJ45, Stranded, 550 MHz, UTP, Pure Bare Copper Wire, 28 AWG, LAN Network Patch Cable, Blue, 5 FT, 25-Pack

.ICC’s CAT6 unshielded twisted pair (UTP) patch cords exceed all performance requirements up to 550 MHz. They are ETL verified to ANSI/TIA-568.2-D and UL listed. These patch cords are made from low-profile, snag-free boots for high-density applications. They are available in the most popular stock length and in a variety of colors to easily differentiate connection types.
.NATIONAL ELECTRICAL CODE (NEC) COMPLIANT: Built with 100% stranded pure bare copper conductors, meeting NEC Section 800.179, which mandates that “Conductors in communications cables, other than coaxial, shall be copper.” Rated for 75°C and 300V, CAT6 slim patch cables support stable network communications while reducing fire hazards
.PoE TYPE 2 RATED PATCH CABLE: This CAT6 slim Ethernet cable supports Power over Ethernet (PoE) Type 2 up to 30W, suitable for devices such as IP cameras, access points, and other network-powered equipment. The patch cable supports 550 MHz performance and is ETL and UL listed for safety and compliance
.DATA CENTER GRADE PERFORMANCE: CAT6 slim patch cables are wired to T568B and factory tested to meet TIA performance standards, supporting 10/100/1000 Mbps Gigabit Ethernet with bandwidth up to 550 MHz for structured cabling environments
.50 MICRO-INCH GOLD-PLATED CONTACTS: Contacts are with 50 micro-inches of gold over phosphor bronze to resist corrosion and support repeated plated plug-to-jack insertion cycles
.CLEAR BOOT WITH CLIP PROTECTION: Transparent boot provides a uniform look with the modular plug, prevents snagging on adjacent cables, and limits over-bending at the connector
.SLIM 28 AWG DESIGN: Constructed with 28 AWG stranded conductors to reduce cable diameter, improve airflow, and minimize congestion in high-density patching areas
.INDOOR USE: Designed for indoor network installations using PVC jacket material. Not intended for outdoor or direct burial applications