ICC CAT6 Ethernet Patch Cord with Clear Boot Strain Relief, RJ45, Stranded, 550 MHz, UTP, Pure Bare Copper Wire, 24 AWG, LAN Network Patch Cable, Yellow, 7 FT, Single

.ICC’s CAT6 unshielded twisted pair (UTP) patch cords exceed all performance requirements up to 550 MHz. They are ETL verified to ANSI/TIA-568-C.2 and UL listed. These patch cords are made from low-profile, snag-free boots for high-density applications. They are available in the most popular stock length and in a variety of colors to easily differentiate connection types.
.NATIONAL ELECTRICAL CODE (NEC) COMPLIANT: Built with 100% stranded pure bare copper conductors, meeting NEC Section 800.179, which mandates that “Conductors in communications cables, other than coaxial, shall be copper.” Rated for 75°C and 300V, CAT6 patch cables support stable network communications while reducing fire hazards
.PoE++ TYPE 4 RATED PATCH CABLE: This CAT6 Ethernet patch cable is built with stranded 24 AWG pure copper conductors and supports Power over Ethernet (PoE++) Type 4 up to 100W, suitable for IP cameras, wireless access points, and other high-power network devices. Supports up to 250 MHz performance and is ETL and UL listed for safety and compliance
.DATA CENTER GRADE PERFORMANCE: CAT6 patch cables are wired to T568B and factory tested to meet TIA performance standards, supporting 10/100/1000 Mbps Gigabit Ethernet with bandwidth up to 250 MHz for structured cabling environments
.50 MICRO-INCH GOLD-PLATED CONTACTS: Contacts are plated with 50 micro-inches of gold over phosphor bronze to resist corrosion and support repeated plug-to-jack insertion cycles
.CLEAR BOOT WITH CLIP PROTECTION: Transparent boot provides a uniform look with the modular plug, prevents snagging on adjacent cables, and limits over-bending at the connector
.INDOOR USE: Designed for indoor network installations using PVC jacket material. Not intended for outdoor or direct burial applications