TARAMPS TRIO400 400 Trio Class D Amplifier 2-ohm 400W RMS 1-Channel 3 Outputs Automotive Enhance Car Audio System

TARAMPS TRIO400 400 Trio Amplifier 2-ohm 400W RMS 1-Channel 3 Outputs Automotive Enhance Car Audio System || The 400 TRIO amplifier's individual level works for each of the channels so you can adjust the volume of each component individually from the module itself. The 400 TRIO module was also developed to meet the needs of some specific sectors in our case the famous trio speakers. Taramps amplifier has two audio inputs: the classic and well-known RCA , and the wired input, with ART system , eliminating the need for an RCA converter. || || This is a 3-way component, and each of them has pre-defined frequency cuts. || VIA LOW - aimed at the speakers. It has cuts between 35Hz and 1KHz, delivering 340 Watts RMS at 2 ohms or 200 Watts RMS at 4 ohms. VIA MID - aimed at drivers. It has cuts between 1KHz and 7KHZ, delivering 30 Watts RMS at 4 ohms. VIA HIGH - aimed at super tweeters. It has cuts between 7KHZ and 50KHz, delivering 30 Watts RMS at 4 ohms. || || TECHNICAL SPECIFICATIONS || • Operating class: Class D || • Number of channels: 03 || • Maximum power = Via Low: @14.4 VDC – 2 Ohms: 340 Watts RMS / @14.4 VDC – 4 Ohms: 200 Watts RMS | Via Mid: @14.4 VDC – 4 Ohms: 30 Watts RMS | Via High: @14.4 VDC – 4 Ohms: 30 Watts RMS || • Input sensitivity: 250mv || • Signal to noise ratio : >90db || || • Frequency response = Via Low: 35Hz (-3db) ~ 1khz (-6db) | Via Mid: 1khz (-6db) ~ 7khz (-6db) | Via High: 7khz (-6db) ~ 50khz (-3db) || • Limiters/anti-clipping: Fixed (1% THD Max.) || • Input impedance: 10K Ohms || • Protection system: Output short circuit & thermal protection || • Minimum supply voltage: 9 VDC || • Maximum supply voltage: 16 VDC || • Idle consumption: 0.60A || • Maximum musical consumption: 15A || • Maximum consumption in sinusoidal signal: 30A || || • Dimensions (WxHxD): 138 X 49 X 132mm || • Weight: 0.625 kg